High frequency HFSSTC tesla electronic candle DIY kit

Name: HFSSTC Tesla Electric Candle
Working frequency: about 15MHz
Working voltage: 36-40V 2A
Product size: 5CM long * 5CM wide * 8CM high (excluding secondary ignition coil size)
Secondary ignition coil material: Ceramic
Secondary coil: 0.3 enameled wire * 65 turns
Running time: After testing, it can work continuously for more than 30 minutes;
Tesla plasma accessories: primary coil, upper PCB board (0805 LED red soldered), lower PCB board, 6.2K resistor, secondary coil (ceramic core, winding wire), 24V fan, 5CM*5CM radiator, M3* 50 screws (diameter: 3mm, length: 50mm), 5MM ABS spacers, extended half-row pins, 2P curved pins, 4P busbars, 1808 encapsulated 15P capacitors withstand voltage 3KV, 102 encapsulated 1206 withstand voltage 1KV, 8 *12 I-shaped inductance 2.2UH in-line magnetic beads 3.5*0.8*9, A03 self-locking switch, DC005 seat, 2W 200 ohm resistor, 5MM LED white and green (ordinary green), 2K resistor (accuracy 1%), 3K resistor (accuracy 1%), IRF250, silicone bag.

Instructions:
1. Connect the host and the secondary coil;
2. Before energizing, ensure the secondary coil is not exposed to objects. Otherwise, the secondary coil and external contact objects will directly ignite and burn the coil after energizing.
3. Turn on the power and turn on the ignition switch (after pressing the ignition switch, the arc should be drawn out as soon as possible (within 3 seconds), and metal objects such as screwdrivers, blades, and iron wires can be used).

Safety Instructions:
1. It is strictly forbidden to touch the ignition coil, host coil, and electronic devices (except the ignition switch) when the product is working;
2. In order to ensure safety, no flammable and explosive items should be placed around the product when it is running;
3. When the product is working, it may cause electromagnetic interference to the surrounding electronic equipment (15MHZ has no effect on the human body);
4. Not suitable for children to play.
5. Before powering on, ensure that the primary coil’s extension wire does not touch the secondary coil or the conductor cannot touch the secondary coil. Otherwise, the secondary coil will break down and be scrapped. (If you buy one with a casing, leave enough length for the secondary coil to install, and cut off the excess)