Computer hardware will generate very high heat during operation. After the host has been running for some time, the temperature inside the chassis will reach saturation. At this time, it is impossible to effectively dissipate the heat through the air to reduce the temperature. This is a common cause of host freezes and crashes. If not solved in time, it will seriously damage the life of the host hardware. It is recommended to install a 12cm 7-blade dual-aperture hydraulic fan to form a dual air duct to assist chassis heat dissipation. Colorful RGB, circular vision, multi-mode lighting, control at will.
Fan parameters:
Fan size: 120x120x25mm
Cooling method: air cooling
Rated voltage: 12V
Rated current: 0.28A
Speed: 1200RPM±10%
Air volume: 39.2CFM±10%
Bearing: 2Hydraulic
Lifespan: 40,000 hours
Single color interface: small 3Pin + large 4D
Controller RGB: small 6Pin
RGB voltage: 5V
Noise value: 26.4DBA±10%
Product details display:
1) 8 silicone shock pads
8 shock pads are added at the 4 corners to effectively reduce the resonance noise between the fan and the chassis, and work silently.
2) Intelligent interface conversion
Single color fan interface: 3 small Pin + large 4 Pin.
3) Closed hydraulic circuit
Lifespan can reach 40,000/hour.
Wind direction display:
Fan interface description:
Note: Only one can be selected for connection, and neither interface can be connected to the power supply simultaneously to avoid short circuits!
3pin fan interface description:
4pin fan interface description:
The 4-pin fan connects to the motherboard fan port. If the motherboard interface is insufficient, you must buy an additional expansion cable.
Reviews
There are no reviews yet.