TJ-56-494 STG atomizer controllable parts kit

The USB nebulizer humidifier kit is temperature-controllable and can be turned off at a scheduled time.

Features:

1) Atomize liquid water;
2) Can be turned on manually, turned off manually, or at a scheduled time;
3) Visual interface, real-time updated display of temperature and humidity (humidity error ±5%, temperature error ±2℃);
4) Human-computer interaction function, which can set the atomization time (maximum value 240min) and humidity limit (99%);
5) Memory function, save the last stored settings before powering off;

Product detail presentation:

1) Microporous atomizing tablets for USB humidifiers;
Voltage 5V, current 300mA, frequency 110KHz, power 2W, hole diameter 5um, number of holes 740, wire length 8cm;
The diameter of the atomized steel sheet is 16mm, and the outer diameter of the rubber ring is 20mm.

2) Pearl cotton swab, strong water absorption;

3) OLED LCD screen;
Indoor temperature display, outdoor temperature display, time display.

Production notes:

1. The welding time should not be too long, 1-3 seconds; otherwise, the copper piece will fall off. If the welding is not done well, remove the soldering iron and weld again. Remember to pay attention to the production pictures and text, and distinguish the positive and negative poles! Pay attention to the white silkscreen welding of the corresponding components when welding.
2. The cotton swab must be soaked in water to be effective. The new cotton swab must be soaked in water for several hours before it becomes effective. It is recommended to wet a sponge and then put the atomizing tablet on the sponge, gently press the atomizing tablet, and observe whether it is normal work;
3. When the amount of mist is small, please replenish the water source in time. If the problem cannot be solved, the atomizer sheet must be replaced.